When placing mpp pipes correctly, mpp pipes are usually not a single pipe, and larger structures require more pipes. There may be problems during loading and storage. If the loading method is not correct, not only will there be many problems at the construction site, but the performance of the protective tube will also be seriously damaged. We know that when mpp power pipes are stacked, the pressure in the mpp power pipes is relatively strong, but in many cases, excessive pressure will cause some damage to the surface.
The environment requirements for stacking mpp power pipes are that they cannot be exposed to sunlight for a long time. After prolonged exposure to sunlight, special substances on the surface will gradually decompose. The height of the mpp power tube stack is required, and the height of the mpp power tube stack is not as high as possible. If the height exceeds a certain range, the pressure in the bottom tube is not only very high, but also dangerous.
mpp power pipe daily maintenance and maintenance
Even if these products are large in number and their length is short, attention to detail can be time consuming if used. Marking problems can still occur during embedding of mpp power pipes, so it can also be done through marking during maintenance and maintenance. If it turns out that a particular cable does have a problem, the marking is the primary detection indicator for the product. Once you find the marker, you save time.